Assembly

Step 1:
Remove spout by pulling gently away from the dome. A slight twisting motion may be useful on hard to remove spouts.

Step 2:
To remove top, grasp dome and base firmly. Do not use the spout receiver for leverage as this can stress the plastic and cause cracking of the dome.

Step 3:
Rotate top one quarter turn counter clockwise. This will unlock the domed housing.

Step 4:
Pulling upwards will separate the dome from the motor base and reveal the Hydroprop and removable rubber gasket.

Step 5:
Remove interior chamber by placing thumbs on inner ring. Apply slight pressure outwards until the interior baffle snaps out.
 
Copyright © 2010 ERBOpipe. Powered by Zen Cart